Fivepears 1/4 Inch Shank Rabbet Router Bit with 6 Bearings Set, Rabbeting Router Bit can Interchangeable and Adjustable Multi Depths Cutter 1/8", 1/4", 5/16", 3/8", 7/16", 1/2" …

Screw holding in the pieces could be stronger. Works just fine but the first time I used it the screw backed off and then the bearing flow off. So I put it back together and tightened the screw a little bit more and that stripped the screw. I had the correct (included) Allen wrench so no issue on correct size there, seems to be just a weak screw head.

Works great with no tearout. Only complaint was the setscrew holding the bearing when shipped was so tight the allen wrench could not remove it. Had to use vice grips.

This 1/4 " Shank Router Rabbit works Great and it's a Great Value. Glad I bought it.

Gets the job done but each bearing falls apart every time I use it. Had to switch them all out with ones I already had.

The largest sized spacer in the pack worked great, but the next size down was too much of a difference in size and I was not able to control it well enough to prevent damage to the cutter. I had to take it to a professional. Were I to try this again, I would need to source a bearing that would be 2nd largest.There was two of the same size in the pack so they could have provided an alternate size.

First off, I do not use these bearings in a router environment. I would if necessary, though. I do use the whole set still on the spindle with a couple of washers as spacers to balance mower blades. I found two sets online but had to have a 7/8" bearing for the center hole on my JD blades. These were the ones. Saw a Youtube video on this, and these work just fine. Couldn't believe the difference in my mowing experience after using these to balance my blades. Very inexpensive alternative to the $120-$180 super magnetic version. Very pleased.

great product for the price

Home wood working.