SYY Thermal Pad, 80x40x0.5mm, Soft Silicon Thermal Compound, High Temperature Resistance and Non Conductive for Laptop Heatsink/GPU/CPU/LED Cooler

I used the 2mm version of this thermal pad to replace the old thermal pads on my RTX 3070 founders edition graphics card. I decided to replace the old thermal pads when I opened the graphics card to replace the thermal paste. After replacing the pads I only noticed a drop of around 2 degrees which is within margin of error. Importantly though when I reopened the card to check the placement I could see all the thermal pads were making contact with all the memory and capacitors (there is a thin long strip of thermal pad, which I ended up squishing either side to make a little bit taller, this was the only way to ensure contact) this was great news, as reviews of other pads appear to be too big or small when the card has been reassembled, great to find something which was a good fit, they are also quite soft so can be squished slightly either side if you need to make them a tiny bit taller. There was enough to replace all the pads with a very small amount left over. A quick suggestion for anyone replacing their thermal pads would be to take a picture before removing the old pads, and use this as reference for the position of the new pads once the heatsink has been cleaned. Final note - the single thermal pad in contact with the backplate on the RTX 3070 founders edition is slightly thicker than the others on the main board, so I left the old existing one on, but if you do decide to replace that pad be aware of the difference in size.

Used this as a stop gap but think I will just keep it.Had an issue with a gpu getting very hot around the vrms and memory modules, tried the "1 one enjoy" pads that are supposed to be 12.8wk rated but they were definitely not, with thermals still getting a bit toasty. Got these as it was same day and I think I might just keep using this brand.Results are quite good with gpu hitting 67 under heavy load (using mx6 paste) and now no throttle on the ram.Also for some bizarre reason, putting this over the vrm coils reduced my 3060ti coil whine by about 90% which is a miracle considering its the one thing I hated about the card.

I was a little bit underwhelmed with the amount that I got. It is a very small packaging with only two average sized pads in it. They are also fairly thinPerformance wise, they are keeping my ssd's at approximately the same temperature they were at with the stock pads provided by the motherboard manufacturer.

i used these on the backplate to get better contact as existing pads where 2 short and did nothing.doing this dropped temps down by a 2c.

Have tried everything to stop my lenovonlaptop from overheating, including expensive fan trays for it to sit on. Could have saved myself loads of money if i had just bought this first. Job done.

Honestly a very good product and I reccomend.

Just what I was looking for, no issues with this thermal pad

NVMe in M.2 under the motherboard on an ITX build. Thermal pad between the drive and the frame dropped temps from 93°C to <55°C.

Worked perfectly for replacing my thermal pads on my RTX 3080. I've been having huge temperature spikes on my GPU while gaming, or even doing light work. I've had my 3080 for a few years now with stock thermal pads. The installation was easy overall after watching a few videos on how to properly disassemble my GPU without damaging it. Since replacing with these pads, my temps have gone way down, and I've seen more consistent temps across the board. If you're having temperature issues, consider these pads for a replacement.

Super fácil de cortar, e incorporar. Son los thermal pad que utilizan los equipos Gamer. El único detalle es su costo.

I researched online for a while comparing thermal conductivity and efficiency and this compound works great! I used it to replace the hardened compound on a 2013 MacPro computer in various locations and the system average temperatures dropped around 10deg F. I recently ordered these again and this time I used it on my Amazon Fire Cube 2nd Gen as it was running slow. Once I replaced the original thermal pads with these it has been running without any issues from glitching or hanging up.

L’oggetto nel complesso è come deve essere, svolge perfettamente la sua funzione ed è facilmente applicabile.Ho sostituito i pad termici alla mia scheda video ma al pelo sono riuscito a coprire tutti i componenti, è davvero una quantità di prodotto infima per il costo che ha, mi aspettavo almeno che ne avanzasse un po’ e non che a stento riuscissi ad utilizzarla una sola volta.

Le stesse della x series, consigliati.