Orion Motor Tech Lift Scissor Jack Center Stand, 4-13 Inch Height Range Orion Motor Tech Jack and Bike Stand, 1100lb Capacity Bike Repair Stand for Orion Motor Tech Maintenance up to 1-2 Ton, Orange

Very nice lift, I greased every thread and conta t point . Works much smoother I am sure it will last much longer lubed. Very stable on my lift table. Thanks fore a great product at a reasenable price. Mike Ski

I have a dirtbike 265lbs and light adventure bike 337lbs, worked great on both. I use a small power drill and it goes up and down in a second or two, with great ease. Very sturdy and stable….has locking pins, but I haven’t used them, as it feels sturdy without them. When fully retracted, it’s like a steel plate, for economy of space, and i was very happy i didn’t have to assemble it. Came assembled out of the box, and I was able to used it with-in a minute of unpacking, as I had bike projects waiting. Big help when cleaning the bikes too, cause I can lube the chain easy, with back wheel of the ground. Great price, great product.

Lifted bike evenly off floor, and stayed even without tires. Lowering was just as easy, set it down nice and easy on the kick stand. No worry of it tipping. Used a socket wrench lifted quick and easily. Great lift. Works perfect. At full lift I had about 3 inches under the tires. I'm putting 3 inch casters on it and it will be perfect.

I bought this to place my 1988 Electra Glide on while I worked on it. It put the bike on the jack and it works just like it should. The only issue I have with this item is that it has a rubber pad attached to one face of the jack (the top, I assume) but not the other side. The paint on the other side will be scraped off after a few uses. I glued a second rubber pad on the bottom so that I don't have to deal with a scraped, rusty bottom of the jack. Other than that, it is a great product, sturdy and well-made.

Does the job as well as any more expensive larger lift would. Easy to store and well made, quality product. lifting height and compression is perfect for my 2024 Lowrider S.

I bought this lift for servicing my Honda XR650L motorcycle. It functions perfectly and makes getting my bike in the air irritation free!I would dock one star due to the lift not being quite high enough for my motorcycle, but the XR650L has exceptional ground clearance not found on most motorcycles so that would be unfair. I use a pair of 4"x4" wooden blocks to set the life on before raising it and all is good.Additionally, it would be nice if the lift had a bit wider footprint.The instructions specifically mention to not use an impact driver to raise the lift and that seems reasonable to me. The lift raises my bike, using the provided hand-crank, with ease and it only takes a minute. Otherwise, I could simply use a ratchet/socket with an extended handle.All in all, it's a great tool and especially for the price.

Very good quality motorcycle Jack but the plastic brush came broken, possibly during the shipping.Hopefully, the seller can replace it. Attached photos.

Great for those who have limited space. Lifts my factory 1200 sportster with ease! Great product.